Top Appliance Repair
    Repaired

    Whirlpool Duet Washer F09 E01, Door Locked and Not Draining: Drain Pump and Door Boot Replaced in San Francisco

    The washer door stayed locked, the water was not draining and the display showed an error code. The customer also asked about mold on the door gasket; the washer sits in a very tight cabinet. The drain pump was not working, which explains the F09 E01 (long drain) code and the locked door. The door boot had also come out of its mounting position and carried black mold buildup.

    Repair at a glance

    CitySan Francisco, CA
    ApplianceFront-load washer
    CategoryMajor Brands
    Brand & modelWhirlpool WFW86HEBC1 Duet front-load washer
    Repair date
    Customer complaintThe washer door stayed locked, the water was not draining and the display showed an error code. The customer also asked about mold on the door gasket; the washer sits in a very tight cabinet.
    DiagnosisThe drain pump was not working, which explains the F09 E01 (long drain) code and the locked door. The door boot had also come out of its mounting position and carried black mold buildup.
    Repair cost$593 (parts and labor)
    Warranty6 months on parts and labor
    OutcomeRepaired

    What I found

    The washer was built into a narrow cabinet next to the dryer. The display showed F09 and then E01, the drum still held water and the door lock stayed engaged because the control would not release it with water inside. On this Duet family, F9 E1 is the long-drain code, so I started with the drain side rather than the lock itself.

    The door boot had slipped out of its mounting lip at the bottom and had dark mold along the folds, which the customer had already noticed.

    Pump and door boot replacement

    After draining the tub by hand, I pulled the washer out of the cabinet, removed the front panel and reached the drain pump at the bottom of the cabinet. The pump did not run the water out, so I replaced it (W10391443, now supplied as WPW10391443). With the front open, I also removed the old boot and fitted the updated door bellow W11106747, which replaces W10340443.

    Before sliding the washer back, I checked the water hoses and drain connection behind the cabinet, then ran a drain and spin cycle. The water pumped out, the door unlocked at the end of the cycle and the new boot sealed without leaks.

    Photos from this repair

    • Whirlpool Duet washer installed in a tight laundry cabinet.
      Whirlpool Duet washer installed in a tight laundry cabinet.
    • Front-load washer with water left in the drum.
      Front-load washer with water left in the drum.
    • F09 code shown on the Whirlpool Duet display.
      F09 code shown on the Whirlpool Duet display.
    • E01 code that follows F09 on the same display.
      E01 code that follows F09 on the same display.
    • Water standing in the drum because the washer would not drain.
      Water standing in the drum because the washer would not drain.
    • Door boot with debris and mold at the bottom fold.
      Door boot with debris and mold at the bottom fold.
    • Door boot pulled out of its mounting position.
      Door boot pulled out of its mounting position.
    • Part markings on the original door boot.
      Part markings on the original door boot.
    • Drain pump at the bottom of the washer cabinet.
      Drain pump at the bottom of the washer cabinet.
    • Front panel removed with the old door boot still in place.
      Front panel removed with the old door boot still in place.
    • Tub opening ready for the replacement door boot.
      Tub opening ready for the replacement door boot.
    • Drain pump and drain hose connection before replacement.
      Drain pump and drain hose connection before replacement.
    • Drain pump assembly after removal of the front panel.
      Drain pump assembly after removal of the front panel.
    • Water supply hoses and valves behind the cabinet.
      Water supply hoses and valves behind the cabinet.
    • Old door boot and drain pump after replacement.
      Old door boot and drain pump after replacement.

    Need Whirlpool front-load washer repair?

    $85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.