Top Appliance Repair
    Repaired

    Whirlpool WDF520PADM7 Not Draining, Drain System Cleaning in San Mateo

    Water stayed in the tub because the drain system was clogged. We cleaned it, including the air gap, and ran the dishwasher through its diagnostic test.

    Repair at a glance

    CitySan Mateo, CA
    ApplianceDishwasher
    CategoryMajor Brands
    Brand & modelWhirlpool WDF520PADM7
    Repair date
    Customer complaintThe dishwasher was not draining, and there was water at the bottom after a cycle.
    DiagnosisThe drain system was clogged and needed cleaning. The drain pump was worn but still working.
    Repair cost$234
    Warranty6 months on parts and labor
    OutcomeRepaired

    What the customer told us

    The Whirlpool WDF520PADM7 left water in the bottom of the tub after every run.

    What we found

    The drain system was clogged. When we ran a drain, water came out of the air gap on the counter instead of going down the drain. The drain pump was worn, but it was still pumping.

    How we repaired it

    We cleaned the sump and filter area, the drain hose and the air gap.

    Testing

    We ran the dishwasher through its diagnostic mode and all tests passed. We let the customer know the drain pump would need replacing if the problem comes back.

    Photos from this repair

    • Whirlpool WDF520PADM7: Whirlpool WDF520PADM7 dishwasher
      Whirlpool WDF520PADM7 dishwasher.
    • Whirlpool WDF520PADM7: Dishwasher open during service
      Dishwasher open during service.
    • Whirlpool WDF520PADM7: Sump and filter area in the bottom of the tub
      Sump and filter area in the bottom of the tub.
    • Whirlpool WDF520PADM7: Water coming out of the air gap during draining
      Water coming out of the air gap during draining.

    Need Whirlpool dishwasher repair?

    $85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.