Sub-Zero 632/F Freezer Warming and Noisy, Compressor and Sealed System Replaced in Cupertino
The freezer swung up to 10°F and the compressor was noisy and worn. We replaced the compressor, evaporator, heat exchanger, drier and related parts, then tested and charged the system.
Repair at a glance
| City | Cupertino, CA |
|---|---|
| Appliance | Built-In Freezer |
| Category | High-End Brands |
| Brand & model | Sub-Zero 632/F |
| Repair date | |
| Customer complaint | The refrigerator temperature was normal, but the freezer sometimes rose to 10°F and came back down on its own, with a strange sound. |
| Diagnosis | The sound came from the freezer compressor and showed that it was worn out. The sealed system was replaced, including the compressor, evaporator and heat exchanger, along with smaller parts. |
| Repair cost | $2,460.11 |
| Warranty | 1 year on parts and labor |
| Outcome | Repaired |
What the customer told us
The refrigerator side of the Sub-Zero 632/F was fine, but the freezer sometimes went up to 10°F and then came back down, and there was a strange sound.
What we found
The sound was coming from the freezer compressor, which was worn out. We checked pressures with gauges.
How we repaired it
We removed the unit, took the freezer housing apart and replaced the compressor, evaporator coil, heat exchanger, filter drier, accumulator, defrost heater, defrost terminator and fan motor. Then we ran a high-pressure test, vacuumed the system and charged it.
Testing
We checked the pressures on the gauges and confirmed the freezer was pulling down.
Photos from this repair

Sub-Zero 632 built-in with panel doors. 
Sub-Zero rating plate. 
Freezer evaporator compartment. 
Gauges on the sealed system. 
New compressor in the box. 
Old compressor and tubing during removal. 
New evaporator coil. 
New filter drier installed. 
Gauges connected after the charge. 
Unit reassembled after the repair.
Need Sub-Zero built-in freezer repair?
$85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.