Samsung WF42H5200AP/A2 Not Draining, Drain Pump Replacement in Newark
The washer stopped draining because the drain pump had failed. With a second technician we took the dryer off the stack, pulled the washer out, and replaced the pump.
Repair at a glance
| City | Newark, CA |
|---|---|
| Appliance | Washer |
| Category | Major Brands |
| Brand & model | Samsung WF42H5200AP/A2 |
| Repair date | |
| Customer complaint | Water kept staying in the washer after draining it twice, so the wash cycle would not finish. |
| Diagnosis | The drain pump was not working and needed to be replaced. The washer is stacked, so the dryer had to be removed first. |
| Repair cost | $523 |
| Warranty | 6 months on parts and labor |
| Outcome | Repaired |
What the customer told us
The customer had drained the Samsung WF42H5200AP/A2 by hand twice, but water kept staying in the drum and the cycle would not finish.
What we found
The drain pump was not pumping. The washer sits under a dryer in a closet, so getting to the pump meant taking the dryer down first.
How we repaired it
We came back with a second technician, lifted the dryer off the stack and pulled the washer out. We opened the washer, removed the old drain pump, which had lint and debris around the impeller, installed the new pump assembly (DC31-00178A), and restacked the dryer on top. We also checked the dryer vent hose while the unit was out.
Testing
We ran a drain and spin cycle. The washer drained fully and finished the cycle.
Photos from this repair

Samsung stacked washer and dryer in the laundry closet. 
Samsung WF42H5200AP washer. 
Drum with standing water before the repair. 
Washer opened up to reach the drain pump. 
Old drain pump with lint and debris. 
Dryer vent hose behind the stack. 
Washer and dryer pulled out during the repair. 
Washer reassembled after the pump replacement.
Need Samsung washer repair?
$85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.