Samsung DVE50BG8300V Dryer Control Board and LG Washer Shocks in Hayward
The Samsung dryer kept running when it was switched off because of a faulty control board. We replaced the board, and on the LG washer next to it we replaced three shock absorbers.
Repair at a glance
| City | Hayward, CA |
|---|---|
| Appliance | Dryer |
| Category | Major Brands |
| Brand & model | Samsung DVE50BG8300V |
| Repair date | |
| Customer complaint | The dryer kept spinning after it was turned off with the door closed. |
| Diagnosis | The dryer main control board was faulty and needed replacement. The shock absorbers on the LG washer were also worn and needed replacement. |
| Repair cost | $756 |
| Warranty | 6 months on parts and labor |
| Outcome | Repaired |
What the customer told us
The Samsung DVE50BG8300V dryer kept spinning even after it was turned off with the door closed.
What we found
The dryer main control board was faulty and was keeping the drum motor running. While we were there we also checked the LG washer next to it, and its shock absorbers were worn out.
How we repaired it
On the dryer we removed the top panel, took out the old main control board and installed the new one. On the LG washer we took off the front panel and replaced three shock absorbers (ACV72909503, which replaces ACV72909501).
Testing
We ran the dryer and turned it off to make sure the drum stopped. We ran the washer through a spin to check that the drum was steady.
Photos from this repair

Samsung DVE50BG8300V dryer. 
Samsung dryer front. 
Old dryer control board with the harness. 
Control board in the dryer housing. 
Old and new control boards. 
Control boards side by side. 
LG washer before the shock absorber replacement. 
LG washer. 
LG washer with the front panel off. 
Washer cabinet during the shock replacement. 
Dryer vent hose.
Need Samsung dryer repair?
$85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.