Top Appliance Repair
    Repaired

    GE Profile PHP9036 Induction Cooktop: Right Burners Not Turning On, Saratoga

    The right front and right rear zones of this GE Profile induction cooktop stopped turning on. The control module for that side had failed, and it was replaced together with both right-side induction elements.

    Repair at a glance

    CitySaratoga, CA
    ApplianceInduction cooktop
    CategoryMajor Brands
    Brand & modelGE Profile PHP9036SJ1SS 36" induction cooktop
    Repair date
    Customer complaintThe two right-side burners on the GE PHP9036 induction cooktop were not turning on.
    DiagnosisThe induction control module that drives the right-side zones was faulty. Both right-side induction elements, controlled by the same module, were replaced along with it so the cooktop would keep working reliably.
    Repair cost$1,301 (parts and labor)
    Warranty6 months on parts and labor
    OutcomeRepaired

    What we found

    The customer told us the right burners on his GE PHP9036 induction cooktop had stopped turning on, while the left side still worked. On this model one induction module powers both right-side zones, the 3,200-watt front and the 1,800-watt rear element.

    Testing pointed to the control module for that side. Because both coils run from the same module and a weak coil can take out a new board, we recommended replacing the module and both right-side elements at the same time. The parts were WB27X33086 (module), WB30X38485 (3,200-watt element) and WB30X38225 (1,800-watt element).

    Disassembly and replacement

    With the parts in, I lifted the cooktop out of the counter and removed the glass top. Glass induction tops need careful handling here, because the frame, the gasket and the coil supports all have to line up again on reassembly.

    I swapped the induction module in the lower housing, moved the power and coil leads over to the new board, and installed the two new elements on their supports. Then the glass went back on and the cooktop was set back into the counter.

    Testing

    After reinstalling, I ran each right-side zone with a pan on it, at low and high settings, and checked the left side as well. All four zones heated normally. The repair carries our 6-month parts and labor warranty.

    Photos from this repair

    • GE Profile PHP9036SJ1SS induction cooktop; the two right-side zones were not turning on.
      GE Profile PHP9036SJ1SS induction cooktop; the two right-side zones were not turning on.
    • Cooktop opened: induction elements on top, control module in the lower housing.
      Cooktop opened: induction elements on top, control module in the lower housing.
    • New GE induction control module in its packaging.
      New GE induction control module in its packaging.
    • Induction control module and cooling fan inside the cooktop housing.
      Induction control module and cooling fan inside the cooktop housing.
    • Power and coil wiring at the induction module.
      Power and coil wiring at the induction module.
    • Right-side induction elements, 1,800-watt and 3,200-watt.
      Right-side induction elements, 1,800-watt and 3,200-watt.
    • Glass top lifted off the frame during reassembly.
      Glass top lifted off the frame during reassembly.
    • All induction elements in place before the glass goes back on.
      All induction elements in place before the glass goes back on.
    • Underside of the cooktop with the module housings visible.
      Underside of the cooktop with the module housings visible.
    • Cooktop back in the counter above the wall oven.
      Cooktop back in the counter above the wall oven.
    • Finished GE Profile induction cooktop installed in the counter.
      Finished GE Profile induction cooktop installed in the counter.

    Need GE induction cooktop repair?

    $85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.