Top Appliance Repair
    Repaired

    GE Dryer Not Heating, Then Not Turning On: Burned Heating Element Wire Replaced in San Francisco

    The dryer was not getting hot and was not drying clothes. Later it would not turn on at all. The power wire connected to the heating element had burned out. There was also a significant amount of lint buildup inside the dryer and in the vent line.

    Repair at a glance

    CitySan Francisco, CA
    ApplianceElectric dryer
    CategoryMajor Brands
    Brand & modelGE GTD33EASK1WW electric dryer
    Repair date
    Customer complaintThe dryer was not getting hot and was not drying clothes. Later it would not turn on at all.
    DiagnosisThe power wire connected to the heating element had burned out. There was also a significant amount of lint buildup inside the dryer and in the vent line.
    Repair cost$307 (parts and labor)
    Warranty6 months on parts and labor
    OutcomeRepaired

    Opening the dryer

    I removed the top and front panels to reach the heater at the back of the drum. The wire feeding the heating element terminal had burned through at the connector, which first stopped the heat and later left the dryer without power through that circuit. Lint had built up across the base and inside the duct.

    Repair

    I replaced the burned heat-element power wire and secured it away from the drum. Then I cleaned lint out of the cabinet and the vent line.

    With everything reassembled, the dryer started, heated and exhausted normally.

    Photos from this repair

    • GE electric dryer in the laundry room.
      GE electric dryer in the laundry room.
    • Dryer opened with the drum removed.
      Dryer opened with the drum removed.
    • Burned power wire at the heating element terminal.
      Burned power wire at the heating element terminal.
    • Heating element area at the back of the cabinet.
      Heating element area at the back of the cabinet.
    • Element terminal bracket with heat damage.
      Element terminal bracket with heat damage.
    • Lint built up inside the dryer.
      Lint built up inside the dryer.
    • Lint along the cabinet base.
      Lint along the cabinet base.
    • Inside of the vent duct before cleaning.
      Inside of the vent duct before cleaning.
    • New wire routed to the heating element.
      New wire routed to the heating element.
    • New power wire connected to the element terminal.
      New power wire connected to the element terminal.
    • Wire secured near the heater housing.
      Wire secured near the heater housing.

    Need GE electric dryer repair?

    $85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.