Electrolux EFMG627UTT0 Dryer Not Drying, Gas Valve Replacement in Menlo Park
The dryer heated on and off because the gas valve was failing. We took the front off, replaced the gas valve assembly and checked the burner.
Repair at a glance
| City | Menlo Park, CA |
|---|---|
| Appliance | Dryer |
| Category | Major Brands |
| Brand & model | Electrolux EFMG627UTT0 |
| Repair date | |
| Customer complaint | The dryer was not drying. Sometimes there was heat, sometimes not. |
| Diagnosis | The gas valve was not working properly and needed to be replaced. |
| Repair cost | $412 |
| Warranty | 6 months on parts and labor |
| Outcome | Repaired |
What the customer told us
The Electrolux EFMG627UTT0 gas dryer was not drying clothes. Sometimes it heated and sometimes it did not.
What we found
We pulled the dryer out, disconnected the vent and gas line, and took off the top and front panel. Watching the burner, the igniter worked but the gas valve was not opening reliably.
How we repaired it
We ordered the gas valve assembly. On the second visit we removed the drum, took out the old valve and installed the new one, then reassembled the dryer and reconnected the gas line and vent.
Testing
We ran the dryer on heat for several cycles of the burner and checked for gas leaks at the connections.
Photos from this repair

Electrolux EFMG627UTT0 gas dryer. 
Dryer pulled out with the front removed. 
Front panel off the dryer. 
Dryer with the drum removed. 
Burner assembly and blower inside the cabinet. 
Burner area during the valve replacement. 
Gas valve assembly on the burner. 
Cabinet with the burner and blower housing. 
Front bulkhead removed. 
Drum support area. 
Vent hose and gas line disconnected. 
Gas line behind the dryer.
Need Electrolux dryer repair?
$85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.