Top Appliance Repair
    Repaired

    Electrolux Dryer Not Hot Enough: Repair and Maintenance in Palo Alto

    The gas dryer did not get hot enough, and clothes usually needed two cycles. The customer reported that the vent had been cleaned but drying was still slow. The initial inspection found restricted ventilation. The completed invoice includes a dryer repair kit, labor and maintenance; the photos document access to the burner, blower and control areas.

    Repair at a glance

    CityPalo Alto, CA
    ApplianceGas dryer
    CategoryMajor Brands
    Brand & modelElectrolux EFMG627UIW1 gas dryer
    Repair date
    Customer complaintThe gas dryer did not get hot enough, and clothes usually needed two cycles. The customer reported that the vent had been cleaned but drying was still slow.
    DiagnosisThe initial inspection found restricted ventilation. The completed invoice includes a dryer repair kit, labor and maintenance; the photos document access to the burner, blower and control areas.
    Repair cost$382 (parts and labor)
    Warranty6 months on parts and labor
    OutcomeRepaired

    Inspection and access

    I first found a restriction in the exhaust ventilation. A dryer cannot move moisture out properly with a blocked vent, so the customer arranged vent cleaning before the follow-up work.

    Repair and reassembly

    On the return visit, I opened the dryer to reach the burner and blower area. The drum was removed for access, and the photos show the gas burner assembly, blower housing and open control console.

    The completed service included the dryer repair kit and maintenance. I reassembled the dryer after the internal work; the invoice does not identify a separate control-board replacement.

    Photos from this repair

    • Stacked Electrolux laundry appliances before service.
      Stacked Electrolux laundry appliances before service.
    • Electrolux dryer controls before disassembly.
      Electrolux dryer controls before disassembly.
    • Wiring along the upper drum opening.
      Wiring along the upper drum opening.
    • Drum removed to reach the burner and blower assemblies.
      Drum removed to reach the burner and blower assemblies.
    • Blower housing exposed during the internal service.
      Blower housing exposed during the internal service.
    • Control console opened during inspection.
      Control console opened during inspection.
    • Control panel after reassembly.
      Control panel after reassembly.
    • Stacked washer and dryer after service.
      Stacked washer and dryer after service.

    Need Electrolux gas dryer repair?

    $85 diagnostic applied to the repair. Serving San Jose, San Francisco & the Bay Area.