What’s the LE Error?
Your LG washer shows “LE”? That’s a signal the motor’s in trouble—it can’t spin the drum to clean your clothes. I’ve fixed tons of these washers, and this error often pops up during spinning. A guy on YouTube swapped a rotor position sensor because his washer crackled and wouldn’t spin. Let’s figure out this motor mystery together!
When Does the LE Error Happen?
The LE error usually shows up when the drum tries to spin fast—like during the spin cycle. It’s like when your toy car stops because a wheel’s stuck.
- Times it happens:
- Clothes are all on one side.
- Motor’s broken or wires are loose.
- My note: I’ve seen it stop mid-wash—super annoying!
Cause 1: Too Many Clothes
Stuffing too many clothes in your LG washer can make the motor mad. It gets tired trying to spin a heavy, wobbly load.
- Fix it: Take some clothes out. Keep it light so the motor stays happy.
Cause 2: Cracking Noises from the Motor
If your washer sounds like it’s cracking or popping, something’s wrong inside. That YouTube video showed it was the rotor sensor acting up.
- What I’ve heard: Once, a washer crackled because a screw fell loose—check for that too!
Cause 3: The Rotor Position Sensor
The rotor sensor is a tiny piece that tells the motor where the drum is. If it breaks, you get the LE error. The YouTube fix replaced it, and I’ve done that tons of times.
- Check it: Look for cracks or loose plugs on the sensor.
Cause 4: Motor Trouble
A bad motor can’t spin the drum, triggering LE. It might smell burnt or not move at all.
- Expert tip: I’ve seen motors die from dust buildup—clean yours every year!
Cause 5: Wires or Belt Problems
Loose wires or a floppy belt can confuse the motor. The belt connects the motor to the drum—if it’s broken, nothing spins.
- Look for: Wiggly wires or a belt that’s stretched out.
Cause 6: Control Board Glitch
The control board is the washer’s brain. If it messes up, it might show LE by mistake.
- Quick fix: Unplug the washer for 5 minutes to reset it. Worked for me once!
How to Fix It: Simple Steps
Here’s what to try:
- Restart: Pause it, move clothes around, start again.
- Check weight: Take out extra stuff.
- Peek inside: Look at the sensor, motor, and belt.
- My advice: If it’s noisy or smells bad, stop and get help.
Expert Story: My Noisy LG Fix
A guy called me about his LG washer—it screeched and showed LE. I found the rotor sensor cracked, just like in that YouTube video. Swapped it in 20 minutes, and it spun perfectly. Always test it after fixing—run a quick cycle!
Brand Tip: LG vs. Samsung
LG washers get LE from motor or sensor woes. Samsung ones might show codes like 4E for water issues instead.
- LG note: Their sensors wear out faster if you overload.
- Pro trick: Wipe the drum monthly—keeps parts strong!
Conclusion: Crack the LE Code
The LE error means your LG washer’s motor is crying for help—cracking noises, no spinning, or a glitchy sensor. Don’t wait, or your clothes stay wet and smelly! I’ve fixed these for years, and simple checks like the YouTube sensor swap work. Keep your washer light and clean—it’ll last longer.
Frequently Asked Questions
Q: Why does my LG washer say LE?
A: The motor’s stuck or lost—maybe the sensor or motor itself broke.
Q: Can I fix cracking noises?
A: Yes, if it’s the sensor—replace it. Noisy motor? Call someone.
Q: What’s a rotor sensor do?
A: It tells the motor where the drum is. If it’s bad, the drum won’t spin.
Q: How do I stop the LE error?
A: Don’t overfill, reset it, or check the motor and sensor.
Q: Is my LG washer old and broken?
A: Not always—LE can happen to new ones too. Fix it first!
